* $computeService = new Google_Service_Compute(...); * $instanceGroupManagers = $computeService->instanceGroupManagers; * */ class Google_Service_Compute_Resource_InstanceGroupManagers extends Google_Service_Resource { /** * Flags the specified instances to be removed from the managed instance group. * Abandoning an instance does not delete the instance, but it does remove the * instance from any target pools that are applied by the managed instance * group. This method reduces the targetSize of the managed instance group by * the number of instances that you abandon. This operation is marked as DONE * when the action is scheduled even if the instances have not yet been removed * from the group. You must separately verify the status of the abandoning * action with the listmanagedinstances method. * * If the group is part of a backend service that has enabled connection * draining, it can take up to 60 seconds after the connection draining duration * has elapsed before the VM instance is removed or deleted. * * You can specify a maximum of 1000 instances with this method per request. * (instanceGroupManagers.abandonInstances) * * @param string $project Project ID for this request. * @param string $zone The name of the zone where the managed instance group is * located. * @param string $instanceGroupManager The name of the managed instance group. * @param Google_Service_Compute_InstanceGroupManagersAbandonInstancesRequest $postBody * @param array $optParams Optional parameters. * * @opt_param string requestId An optional request ID to identify requests. * Specify a unique request ID so that if you must retry your request, the * server will know to ignore the request if it has already been completed. * * For example, consider a situation where you make an initial request and the * request times out. If you make the request again with the same request ID, * the server can check if original operation with the same request ID was * received, and if so, will ignore the second request. This prevents clients * from accidentally creating duplicate commitments. * * The request ID must be a valid UUID with the exception that zero UUID is not * supported (00000000-0000-0000-0000-000000000000). * @return Google_Service_Compute_Operation */ public function abandonInstances($project, $zone, $instanceGroupManager, Google_Service_Compute_InstanceGroupManagersAbandonInstancesRequest $postBody, $optParams = array()) { $params = array('project' => $project, 'zone' => $zone, 'instanceGroupManager' => $instanceGroupManager, 'postBody' => $postBody); $params = array_merge($params, $optParams); return $this->call('abandonInstances', array($params), "Google_Service_Compute_Operation"); } /** * Retrieves the list of managed instance groups and groups them by zone. * (instanceGroupManagers.aggregatedList) * * @param string $project Project ID for this request. * @param array $optParams Optional parameters. * * @opt_param string filter A filter expression that filters resources listed in * the response. The expression must specify the field name, a comparison * operator, and the value that you want to use for filtering. The value must be * a string, a number, or a boolean. The comparison operator must be either `=`, * `!=`, `>`, or `<`. * * For example, if you are filtering Compute Engine instances, you can exclude * instances named `example-instance` by specifying `name != example-instance`. * * You can also filter nested fields. For example, you could specify * `scheduling.automaticRestart = false` to include instances only if they are * not scheduled for automatic restarts. You can use filtering on nested fields * to filter based on resource labels. * * To filter on multiple expressions, provide each separate expression within * parentheses. For example: ``` (scheduling.automaticRestart = true) * (cpuPlatform = "Intel Skylake") ``` By default, each expression is an `AND` * expression. However, you can include `AND` and `OR` expressions explicitly. * For example: ``` (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel * Broadwell") AND (scheduling.automaticRestart = true) ``` * @opt_param bool includeAllScopes Indicates whether every visible scope for * each scope type (zone, region, global) should be included in the response. * For new resource types added after this field, the flag has no effect as new * resource types will always include every visible scope for each scope type in * response. For resource types which predate this field, if this flag is * omitted or false, only scopes of the scope types where the resource type is * expected to be found will be included. * @opt_param string maxResults The maximum number of results per page that * should be returned. If the number of available results is larger than * `maxResults`, Compute Engine returns a `nextPageToken` that can be used to * get the next page of results in subsequent list requests. Acceptable values * are `0` to `500`, inclusive. (Default: `500`) * @opt_param string orderBy Sorts list results by a certain order. By default, * results are returned in alphanumerical order based on the resource name. * * You can also sort results in descending order based on the creation timestamp * using `orderBy="creationTimestamp desc"`. This sorts results based on the * `creationTimestamp` field in reverse chronological order (newest result * first). Use this to sort resources like operations so that the newest * operation is returned first. * * Currently, only sorting by `name` or `creationTimestamp desc` is supported. * @opt_param string pageToken Specifies a page token to use. Set `pageToken` to * the `nextPageToken` returned by a previous list request to get the next page * of results. * @return Google_Service_Compute_InstanceGroupManagerAggregatedList */ public function aggregatedList($project, $optParams = array()) { $params = array('project' => $project); $params = array_merge($params, $optParams); return $this->call('aggregatedList', array($params), "Google_Service_Compute_InstanceGroupManagerAggregatedList"); } /** * Applies changes to selected instances on the managed instance group. This * method can be used to apply new overrides and/or new versions. * (instanceGroupManagers.applyUpdatesToInstances) * * @param string $project Project ID for this request. * @param string $zone The name of the zone where the managed instance group is * located. Should conform to RFC1035. * @param string $instanceGroupManager The name of the managed instance group, * should conform to RFC1035. * @param Google_Service_Compute_InstanceGroupManagersApplyUpdatesRequest $postBody * @param array $optParams Optional parameters. * @return Google_Service_Compute_Operation */ public function applyUpdatesToInstances($project, $zone, $instanceGroupManager, Google_Service_Compute_InstanceGroupManagersApplyUpdatesRequest $postBody, $optParams = array()) { $params = array('project' => $project, 'zone' => $zone, 'instanceGroupManager' => $instanceGroupManager, 'postBody' => $postBody); $params = array_merge($params, $optParams); return $this->call('applyUpdatesToInstances', array($params), "Google_Service_Compute_Operation"); } /** * Creates instances with per-instance configs in this managed instance group. * Instances are created using the current instance template. The create * instances operation is marked DONE if the createInstances request is * successful. The underlying actions take additional time. You must separately * verify the status of the creating or actions with the listmanagedinstances * method. (instanceGroupManagers.createInstances) * * @param string $project Project ID for this request. * @param string $zone The name of the zone where the managed instance group is * located. It should conform to RFC1035. * @param string $instanceGroupManager The name of the managed instance group. * It should conform to RFC1035. * @param Google_Service_Compute_InstanceGroupManagersCreateInstancesRequest $postBody * @param array $optParams Optional parameters. * * @opt_param string requestId An optional request ID to identify requests. * Specify a unique request ID so that if you must retry your request, the * server will know to ignore the request if it has already been completed. * * For example, consider a situation where you make an initial request and the * request times out. If you make the request again with the same request ID, * the server can check if original operation with the same request ID was * received, and if so, will ignore the second request. * * The request ID must be a valid UUID with the exception that zero UUID is not * supported (00000000-0000-0000-0000-000000000000). * @return Google_Service_Compute_Operation */ public function createInstances($project, $zone, $instanceGroupManager, Google_Service_Compute_InstanceGroupManagersCreateInstancesRequest $postBody, $optParams = array()) { $params = array('project' => $project, 'zone' => $zone, 'instanceGroupManager' => $instanceGroupManager, 'postBody' => $postBody); $params = array_merge($params, $optParams); return $this->call('createInstances', array($params), "Google_Service_Compute_Operation"); } /** * Deletes the specified managed instance group and all of the instances in that * group. Note that the instance group must not belong to a backend service. * Read Deleting an instance group for more information. * (instanceGroupManagers.delete) * * @param string $project Project ID for this request. * @param string $zone The name of the zone where the managed instance group is * located. * @param string $instanceGroupManager The name of the managed instance group to * delete. * @param array $optParams Optional parameters. * * @opt_param string requestId An optional request ID to identify requests. * Specify a unique request ID so that if you must retry your request, the * server will know to ignore the request if it has already been completed. * * For example, consider a situation where you make an initial request and the * request times out. If you make the request again with the same request ID, * the server can check if original operation with the same request ID was * received, and if so, will ignore the second request. This prevents clients * from accidentally creating duplicate commitments. * * The request ID must be a valid UUID with the exception that zero UUID is not * supported (00000000-0000-0000-0000-000000000000). * @return Google_Service_Compute_Operation */ public function delete($project, $zone, $instanceGroupManager, $optParams = array()) { $params = array('project' => $project, 'zone' => $zone, 'instanceGroupManager' => $instanceGroupManager); $params = array_merge($params, $optParams); return $this->call('delete', array($params), "Google_Service_Compute_Operation"); } /** * Flags the specified instances in the managed instance group for immediate * deletion. The instances are also removed from any target pools of which they * were a member. This method reduces the targetSize of the managed instance * group by the number of instances that you delete. This operation is marked as * DONE when the action is scheduled even if the instances are still being * deleted. You must separately verify the status of the deleting action with * the listmanagedinstances method. * * If the group is part of a backend service that has enabled connection * draining, it can take up to 60 seconds after the connection draining duration * has elapsed before the VM instance is removed or deleted. * * You can specify a maximum of 1000 instances with this method per request. * (instanceGroupManagers.deleteInstances) * * @param string $project Project ID for this request. * @param string $zone The name of the zone where the managed instance group is * located. * @param string $instanceGroupManager The name of the managed instance group. * @param Google_Service_Compute_InstanceGroupManagersDeleteInstancesRequest $postBody * @param array $optParams Optional parameters. * * @opt_param string requestId An optional request ID to identify requests. * Specify a unique request ID so that if you must retry your request, the * server will know to ignore the request if it has already been completed. * * For example, consider a situation where you make an initial request and the * request times out. If you make the request again with the same request ID, * the server can check if original operation with the same request ID was * received, and if so, will ignore the second request. This prevents clients * from accidentally creating duplicate commitments. * * The request ID must be a valid UUID with the exception that zero UUID is not * supported (00000000-0000-0000-0000-000000000000). * @return Google_Service_Compute_Operation */ public function deleteInstances($project, $zone, $instanceGroupManager, Google_Service_Compute_InstanceGroupManagersDeleteInstancesRequest $postBody, $optParams = array()) { $params = array('project' => $project, 'zone' => $zone, 'instanceGroupManager' => $instanceGroupManager, 'postBody' => $postBody); $params = array_merge($params, $optParams); return $this->call('deleteInstances', array($params), "Google_Service_Compute_Operation"); } /** * Returns all of the details about the specified managed instance group. Gets a * list of available managed instance groups by making a list() request. * (instanceGroupManagers.get) * * @param string $project Project ID for this request. * @param string $zone The name of the zone where the managed instance group is * located. * @param string $instanceGroupManager The name of the managed instance group. * @param array $optParams Optional parameters. * @return Google_Service_Compute_InstanceGroupManager */ public function get($project, $zone, $instanceGroupManager, $optParams = array()) { $params = array('project' => $project, 'zone' => $zone, 'instanceGroupManager' => $instanceGroupManager); $params = array_merge($params, $optParams); return $this->call('get', array($params), "Google_Service_Compute_InstanceGroupManager"); } /** * Creates a managed instance group using the information that you specify in * the request. After the group is created, instances in the group are created * using the specified instance template. This operation is marked as DONE when * the group is created even if the instances in the group have not yet been * created. You must separately verify the status of the individual instances * with the listmanagedinstances method. * * A managed instance group can have up to 1000 VM instances per group. Please * contact Cloud Support if you need an increase in this limit. * (instanceGroupManagers.insert) * * @param string $project Project ID for this request. * @param string $zone The name of the zone where you want to create the managed * instance group. * @param Google_Service_Compute_InstanceGroupManager $postBody * @param array $optParams Optional parameters. * * @opt_param string requestId An optional request ID to identify requests. * Specify a unique request ID so that if you must retry your request, the * server will know to ignore the request if it has already been completed. * * For example, consider a situation where you make an initial request and the * request times out. If you make the request again with the same request ID, * the server can check if original operation with the same request ID was * received, and if so, will ignore the second request. This prevents clients * from accidentally creating duplicate commitments. * * The request ID must be a valid UUID with the exception that zero UUID is not * supported (00000000-0000-0000-0000-000000000000). * @return Google_Service_Compute_Operation */ public function insert($project, $zone, Google_Service_Compute_InstanceGroupManager $postBody, $optParams = array()) { $params = array('project' => $project, 'zone' => $zone, 'postBody' => $postBody); $params = array_merge($params, $optParams); return $this->call('insert', array($params), "Google_Service_Compute_Operation"); } /** * Retrieves a list of managed instance groups that are contained within the * specified project and zone. (instanceGroupManagers.listInstanceGroupManagers) * * @param string $project Project ID for this request. * @param string $zone The name of the zone where the managed instance group is * located. * @param array $optParams Optional parameters. * * @opt_param string filter A filter expression that filters resources listed in * the response. The expression must specify the field name, a comparison * operator, and the value that you want to use for filtering. The value must be * a string, a number, or a boolean. The comparison operator must be either `=`, * `!=`, `>`, or `<`. * * For example, if you are filtering Compute Engine instances, you can exclude * instances named `example-instance` by specifying `name != example-instance`. * * You can also filter nested fields. For example, you could specify * `scheduling.automaticRestart = false` to include instances only if they are * not scheduled for automatic restarts. You can use filtering on nested fields * to filter based on resource labels. * * To filter on multiple expressions, provide each separate expression within * parentheses. For example: ``` (scheduling.automaticRestart = true) * (cpuPlatform = "Intel Skylake") ``` By default, each expression is an `AND` * expression. However, you can include `AND` and `OR` expressions explicitly. * For example: ``` (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel * Broadwell") AND (scheduling.automaticRestart = true) ``` * @opt_param string maxResults The maximum number of results per page that * should be returned. If the number of available results is larger than * `maxResults`, Compute Engine returns a `nextPageToken` that can be used to * get the next page of results in subsequent list requests. Acceptable values * are `0` to `500`, inclusive. (Default: `500`) * @opt_param string orderBy Sorts list results by a certain order. By default, * results are returned in alphanumerical order based on the resource name. * * You can also sort results in descending order based on the creation timestamp * using `orderBy="creationTimestamp desc"`. This sorts results based on the * `creationTimestamp` field in reverse chronological order (newest result * first). Use this to sort resources like operations so that the newest * operation is returned first. * * Currently, only sorting by `name` or `creationTimestamp desc` is supported. * @opt_param string pageToken Specifies a page token to use. Set `pageToken` to * the `nextPageToken` returned by a previous list request to get the next page * of results. * @return Google_Service_Compute_InstanceGroupManagerList */ public function listInstanceGroupManagers($project, $zone, $optParams = array()) { $params = array('project' => $project, 'zone' => $zone); $params = array_merge($params, $optParams); return $this->call('list', array($params), "Google_Service_Compute_InstanceGroupManagerList"); } /** * Lists all errors thrown by actions on instances for a given managed instance * group. The filter and orderBy query parameters are not supported. * (instanceGroupManagers.listErrors) * * @param string $project Project ID for this request. * @param string $zone The name of the zone where the managed instance group is * located. It should conform to RFC1035. * @param string $instanceGroupManager The name of the managed instance group. * It must be a string that meets the requirements in RFC1035, or an unsigned * long integer: must match regexp pattern: * (?:[a-z](?:[-a-z0-9]{0,61}[a-z0-9])?)|[1-9][0-9]{0,19}. * @param array $optParams Optional parameters. * * @opt_param string filter A filter expression that filters resources listed in * the response. The expression must specify the field name, a comparison * operator, and the value that you want to use for filtering. The value must be * a string, a number, or a boolean. The comparison operator must be either `=`, * `!=`, `>`, or `<`. * * For example, if you are filtering Compute Engine instances, you can exclude * instances named `example-instance` by specifying `name != example-instance`. * * You can also filter nested fields. For example, you could specify * `scheduling.automaticRestart = false` to include instances only if they are * not scheduled for automatic restarts. You can use filtering on nested fields * to filter based on resource labels. * * To filter on multiple expressions, provide each separate expression within * parentheses. For example: ``` (scheduling.automaticRestart = true) * (cpuPlatform = "Intel Skylake") ``` By default, each expression is an `AND` * expression. However, you can include `AND` and `OR` expressions explicitly. * For example: ``` (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel * Broadwell") AND (scheduling.automaticRestart = true) ``` * @opt_param string maxResults The maximum number of results per page that * should be returned. If the number of available results is larger than * `maxResults`, Compute Engine returns a `nextPageToken` that can be used to * get the next page of results in subsequent list requests. Acceptable values * are `0` to `500`, inclusive. (Default: `500`) * @opt_param string orderBy Sorts list results by a certain order. By default, * results are returned in alphanumerical order based on the resource name. * * You can also sort results in descending order based on the creation timestamp * using `orderBy="creationTimestamp desc"`. This sorts results based on the * `creationTimestamp` field in reverse chronological order (newest result * first). Use this to sort resources like operations so that the newest * operation is returned first. * * Currently, only sorting by `name` or `creationTimestamp desc` is supported. * @opt_param string pageToken Specifies a page token to use. Set `pageToken` to * the `nextPageToken` returned by a previous list request to get the next page * of results. * @return Google_Service_Compute_InstanceGroupManagersListErrorsResponse */ public function listErrors($project, $zone, $instanceGroupManager, $optParams = array()) { $params = array('project' => $project, 'zone' => $zone, 'instanceGroupManager' => $instanceGroupManager); $params = array_merge($params, $optParams); return $this->call('listErrors', array($params), "Google_Service_Compute_InstanceGroupManagersListErrorsResponse"); } /** * Lists all of the instances in the managed instance group. Each instance in * the list has a currentAction, which indicates the action that the managed * instance group is performing on the instance. For example, if the group is * still creating an instance, the currentAction is CREATING. If a previous * action failed, the list displays the errors for that failed action. The * orderBy query parameter is not supported. * (instanceGroupManagers.listManagedInstances) * * @param string $project Project ID for this request. * @param string $zone The name of the zone where the managed instance group is * located. * @param string $instanceGroupManager The name of the managed instance group. * @param array $optParams Optional parameters. * * @opt_param string filter A filter expression that filters resources listed in * the response. The expression must specify the field name, a comparison * operator, and the value that you want to use for filtering. The value must be * a string, a number, or a boolean. The comparison operator must be either `=`, * `!=`, `>`, or `<`. * * For example, if you are filtering Compute Engine instances, you can exclude * instances named `example-instance` by specifying `name != example-instance`. * * You can also filter nested fields. For example, you could specify * `scheduling.automaticRestart = false` to include instances only if they are * not scheduled for automatic restarts. You can use filtering on nested fields * to filter based on resource labels. * * To filter on multiple expressions, provide each separate expression within * parentheses. For example: ``` (scheduling.automaticRestart = true) * (cpuPlatform = "Intel Skylake") ``` By default, each expression is an `AND` * expression. However, you can include `AND` and `OR` expressions explicitly. * For example: ``` (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel * Broadwell") AND (scheduling.automaticRestart = true) ``` * @opt_param string maxResults The maximum number of results per page that * should be returned. If the number of available results is larger than * `maxResults`, Compute Engine returns a `nextPageToken` that can be used to * get the next page of results in subsequent list requests. Acceptable values * are `0` to `500`, inclusive. (Default: `500`) * @opt_param string orderBy Sorts list results by a certain order. By default, * results are returned in alphanumerical order based on the resource name. * * You can also sort results in descending order based on the creation timestamp * using `orderBy="creationTimestamp desc"`. This sorts results based on the * `creationTimestamp` field in reverse chronological order (newest result * first). Use this to sort resources like operations so that the newest * operation is returned first. * * Currently, only sorting by `name` or `creationTimestamp desc` is supported. * @opt_param string pageToken Specifies a page token to use. Set `pageToken` to * the `nextPageToken` returned by a previous list request to get the next page * of results. * @return Google_Service_Compute_InstanceGroupManagersListManagedInstancesResponse */ public function listManagedInstances($project, $zone, $instanceGroupManager, $optParams = array()) { $params = array('project' => $project, 'zone' => $zone, 'instanceGroupManager' => $instanceGroupManager); $params = array_merge($params, $optParams); return $this->call('listManagedInstances', array($params), "Google_Service_Compute_InstanceGroupManagersListManagedInstancesResponse"); } /** * Updates a managed instance group using the information that you specify in * the request. This operation is marked as DONE when the group is patched even * if the instances in the group are still in the process of being patched. You * must separately verify the status of the individual instances with the * listManagedInstances method. This method supports PATCH semantics and uses * the JSON merge patch format and processing rules. * (instanceGroupManagers.patch) * * @param string $project Project ID for this request. * @param string $zone The name of the zone where you want to create the managed * instance group. * @param string $instanceGroupManager The name of the instance group manager. * @param Google_Service_Compute_InstanceGroupManager $postBody * @param array $optParams Optional parameters. * * @opt_param string requestId An optional request ID to identify requests. * Specify a unique request ID so that if you must retry your request, the * server will know to ignore the request if it has already been completed. * * For example, consider a situation where you make an initial request and the * request times out. If you make the request again with the same request ID, * the server can check if original operation with the same request ID was * received, and if so, will ignore the second request. This prevents clients * from accidentally creating duplicate commitments. * * The request ID must be a valid UUID with the exception that zero UUID is not * supported (00000000-0000-0000-0000-000000000000). * @return Google_Service_Compute_Operation */ public function patch($project, $zone, $instanceGroupManager, Google_Service_Compute_InstanceGroupManager $postBody, $optParams = array()) { $params = array('project' => $project, 'zone' => $zone, 'instanceGroupManager' => $instanceGroupManager, 'postBody' => $postBody); $params = array_merge($params, $optParams); return $this->call('patch', array($params), "Google_Service_Compute_Operation"); } /** * Flags the specified instances in the managed instance group to be immediately * recreated. The instances are deleted and recreated using the current instance * template for the managed instance group. This operation is marked as DONE * when the flag is set even if the instances have not yet been recreated. You * must separately verify the status of the recreating action with the * listmanagedinstances method. * * If the group is part of a backend service that has enabled connection * draining, it can take up to 60 seconds after the connection draining duration * has elapsed before the VM instance is removed or deleted. * * You can specify a maximum of 1000 instances with this method per request. * (instanceGroupManagers.recreateInstances) * * @param string $project Project ID for this request. * @param string $zone The name of the zone where the managed instance group is * located. * @param string $instanceGroupManager The name of the managed instance group. * @param Google_Service_Compute_InstanceGroupManagersRecreateInstancesRequest $postBody * @param array $optParams Optional parameters. * * @opt_param string requestId An optional request ID to identify requests. * Specify a unique request ID so that if you must retry your request, the * server will know to ignore the request if it has already been completed. * * For example, consider a situation where you make an initial request and the * request times out. If you make the request again with the same request ID, * the server can check if original operation with the same request ID was * received, and if so, will ignore the second request. This prevents clients * from accidentally creating duplicate commitments. * * The request ID must be a valid UUID with the exception that zero UUID is not * supported (00000000-0000-0000-0000-000000000000). * @return Google_Service_Compute_Operation */ public function recreateInstances($project, $zone, $instanceGroupManager, Google_Service_Compute_InstanceGroupManagersRecreateInstancesRequest $postBody, $optParams = array()) { $params = array('project' => $project, 'zone' => $zone, 'instanceGroupManager' => $instanceGroupManager, 'postBody' => $postBody); $params = array_merge($params, $optParams); return $this->call('recreateInstances', array($params), "Google_Service_Compute_Operation"); } /** * Resizes the managed instance group. If you increase the size, the group * creates new instances using the current instance template. If you decrease * the size, the group deletes instances. The resize operation is marked DONE * when the resize actions are scheduled even if the group has not yet added or * deleted any instances. You must separately verify the status of the creating * or deleting actions with the listmanagedinstances method. * * When resizing down, the instance group arbitrarily chooses the order in which * VMs are deleted. The group takes into account some VM attributes when making * the selection including: * * + The status of the VM instance. + The health of the VM instance. + The * instance template version the VM is based on. + For regional managed instance * groups, the location of the VM instance. * * This list is subject to change. * * If the group is part of a backend service that has enabled connection * draining, it can take up to 60 seconds after the connection draining duration * has elapsed before the VM instance is removed or deleted. * (instanceGroupManagers.resize) * * @param string $project Project ID for this request. * @param string $zone The name of the zone where the managed instance group is * located. * @param string $instanceGroupManager The name of the managed instance group. * @param int $size The number of running instances that the managed instance * group should maintain at any given time. The group automatically adds or * removes instances to maintain the number of instances specified by this * parameter. * @param array $optParams Optional parameters. * * @opt_param string requestId An optional request ID to identify requests. * Specify a unique request ID so that if you must retry your request, the * server will know to ignore the request if it has already been completed. * * For example, consider a situation where you make an initial request and the * request times out. If you make the request again with the same request ID, * the server can check if original operation with the same request ID was * received, and if so, will ignore the second request. This prevents clients * from accidentally creating duplicate commitments. * * The request ID must be a valid UUID with the exception that zero UUID is not * supported (00000000-0000-0000-0000-000000000000). * @return Google_Service_Compute_Operation */ public function resize($project, $zone, $instanceGroupManager, $size, $optParams = array()) { $params = array('project' => $project, 'zone' => $zone, 'instanceGroupManager' => $instanceGroupManager, 'size' => $size); $params = array_merge($params, $optParams); return $this->call('resize', array($params), "Google_Service_Compute_Operation"); } /** * Specifies the instance template to use when creating new instances in this * group. The templates for existing instances in the group do not change unless * you recreate them. (instanceGroupManagers.setInstanceTemplate) * * @param string $project Project ID for this request. * @param string $zone The name of the zone where the managed instance group is * located. * @param string $instanceGroupManager The name of the managed instance group. * @param Google_Service_Compute_InstanceGroupManagersSetInstanceTemplateRequest $postBody * @param array $optParams Optional parameters. * * @opt_param string requestId An optional request ID to identify requests. * Specify a unique request ID so that if you must retry your request, the * server will know to ignore the request if it has already been completed. * * For example, consider a situation where you make an initial request and the * request times out. If you make the request again with the same request ID, * the server can check if original operation with the same request ID was * received, and if so, will ignore the second request. This prevents clients * from accidentally creating duplicate commitments. * * The request ID must be a valid UUID with the exception that zero UUID is not * supported (00000000-0000-0000-0000-000000000000). * @return Google_Service_Compute_Operation */ public function setInstanceTemplate($project, $zone, $instanceGroupManager, Google_Service_Compute_InstanceGroupManagersSetInstanceTemplateRequest $postBody, $optParams = array()) { $params = array('project' => $project, 'zone' => $zone, 'instanceGroupManager' => $instanceGroupManager, 'postBody' => $postBody); $params = array_merge($params, $optParams); return $this->call('setInstanceTemplate', array($params), "Google_Service_Compute_Operation"); } /** * Modifies the target pools to which all instances in this managed instance * group are assigned. The target pools automatically apply to all of the * instances in the managed instance group. This operation is marked DONE when * you make the request even if the instances have not yet been added to their * target pools. The change might take some time to apply to all of the * instances in the group depending on the size of the group. * (instanceGroupManagers.setTargetPools) * * @param string $project Project ID for this request. * @param string $zone The name of the zone where the managed instance group is * located. * @param string $instanceGroupManager The name of the managed instance group. * @param Google_Service_Compute_InstanceGroupManagersSetTargetPoolsRequest $postBody * @param array $optParams Optional parameters. * * @opt_param string requestId An optional request ID to identify requests. * Specify a unique request ID so that if you must retry your request, the * server will know to ignore the request if it has already been completed. * * For example, consider a situation where you make an initial request and the * request times out. If you make the request again with the same request ID, * the server can check if original operation with the same request ID was * received, and if so, will ignore the second request. This prevents clients * from accidentally creating duplicate commitments. * * The request ID must be a valid UUID with the exception that zero UUID is not * supported (00000000-0000-0000-0000-000000000000). * @return Google_Service_Compute_Operation */ public function setTargetPools($project, $zone, $instanceGroupManager, Google_Service_Compute_InstanceGroupManagersSetTargetPoolsRequest $postBody, $optParams = array()) { $params = array('project' => $project, 'zone' => $zone, 'instanceGroupManager' => $instanceGroupManager, 'postBody' => $postBody); $params = array_merge($params, $optParams); return $this->call('setTargetPools', array($params), "Google_Service_Compute_Operation"); } }